EZ Digital OS-3060D Betriebsanleitung PDF herunterladen (Seite 7)

1.2 Safety instructions

1.2.1 Selecting the mains input voltage

The input voltage can be adapted to suit all the

usual line voltages encountered in Europe by

means of a built-in voltage selector switch.

Before using the oscilloscope, make certain

that the correct mains voltage has been sel-

ected and that the appropriate mains fuse has

been fitted.

Warning!

Setting the voltage selector switch incorrectly

or fitting the wrong fuse can destroy the

measuring appliance.

To set the voltage, make sure that the appliance

has been disconnected from all voltage sources

and measuring circuits. Having isolated it from

the mains supply, prise out the fuse holder

"cover" with the voltage markings and check

that the mains fuse is of the correct type and

appropriate current rating and then replace the

OS-3020 D OS-3060 D

SMOOTH: the stored signal is displayed either by individual pixels (dots) or

continuously (without interruption)

INTER-

POLATION: the stored signal is either displayed by pixels (dots), linearly or as a

"reconstituted"/approximated sine-wave

4) Data security Up to 2 stored signals can be saved/stored and retrieved/reproduced at any time

5) Pre-trigger: Display of signals before the trigger event

Plotter: The stored signal can be printed out on an HP-GL plotter via the RS-232 interface

5) Write speed

at output 1/10th of TIME/DIV setting

6) X-Y function Sensitivity X-axis = CH1: 1 mV - 5 mV/div ±5%

Y-axis = CH2: 1 mV - 5 mV/div ±5%

Phase error 3 or less in the DC range up to 50 kHz

7) Spot velocity Single: 0,2 µs/div to 20s/div (= x 100) 0,1 µs/div to 20s/div

Repetitive: 0,2µs/div to 2 µs/div 0,1 µs/div to 2 µs/div

„ROLL“-Funktion: 0,5µs/div to 20 s/div 0,5 µs/div to 20 s/div

ALT: 0,5 µs/div to 1 ms/div 0,5 µs/div to 0,5 ms/div

CHOP: 1 ms/div to 20 s/div 0,5 ms/div to 20 s/div

8) Probe setting approx. 1 kHz, 0.5 V pp (±3%) square-wave pulse, mark-to-space ratio: 50%

9) Power supply Voltage range Fuse

100 V(90 to 110) AC 2A/250 V

120 V(108 to 132)AC 2A/250 V

220 V(198 to 242)AC 1A/250 V

240 V(216 to 250)AC 1A/250 V

10) Mains frequency 50/60 Hz

11) Power consumption approx. 65 W

12)

13) Dimensions L x W x H 430 x 320 x 140 mm

1) Operating temperature range 0 ºC (min.) to +40 ºC (max.)

2) Storage temperature range -20 ºC to +70 ºC

3) Atmospheric humidity 35% min., 85% max. (RH)

Environmental conditions

Mass approx. 8 kg

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

EZ Digital OS-3060D Betriebsanleitung Seite 7

Kommentare zu diesen Handbüchern